Built, but never flown. currently housing a six blade AT fan unit. powered by 4300 KV outrunner, driven by a 40 amp 2 - 4S Skywalker ESC. controlled by two servos in Delta configuration, with a V-tail mixer currently installed. one small modification during build was adding access to the EDF and servo leads under the vertical stab. Fuselage length:1020mm Wingspan: 670mm Wing loading:47g/dm2 Flying weight:650g Servo:9g required to fly: receiver and transmitter 3s lipo battery 2200 - 3200mah

This is mostly (with the exception of the battery hatch/canopy, the nose cone and the het fan) an Exceed RC F18 70mm edf jet.

It will come BnF/ARF with the retracts, edf unit Het 6904 fan with stock motor, 60amp esc (not pictured) servos, AR610 rx and bottom esc cover (not pictured) installed.

The remaining included parts such as wing servos, servo extension and y adapters, gear doors, linkages/control horns, Will have to be installed along with the wings, vertical and horizontal stabilizers.

I will finish the build for you if you like, but it may take me a couple weeks to find the time.